When you’re out for a nice, relaxing Sunday drive, and you notice some vibrating, along with an odd, rumbling noise, it’s time to think about having your bearing and hub assembly checked. If you are still in doubt, simply rotate your wheel a bit. Now listen closely. Do you hear any sort of noise, or does it feel a bit rough, as if metal is meeting metal? If so, then you can almost be certain that it’s your wheel bearing and hub assembly that needs to be looked at. If you’re new to this, then stick around, because we have the top 10 best wheel bearing assembly’s right here.
First, lets go over just what a wheel bearing assembly is, and why it’s important. It’s the wheel bearing assembly that ensures that your cars wheels move freely, which in turn, guarantees you a nice, smooth ride. This greatly affects not only the quality of the ride, but the handling of your vehicle, and fuel efficiency. Each of the pre-assembled units below will have seals, bearings and sensors. Remember, that these are specific to makes and models.
10. Timken 513188 Axle Bearing and Hub Assembly
The Tinken 513188 Axle Bearing and Hub Assembly is a direct fit hub assembly. Each component has been crafted from high quality materials, and is guaranteed to give you a nice, snug fit and smooth ride. Features include a wheel stud size of M14 x 1.5, ABS, and 27 splines. The 513188 is designed to meet or best OEM specs, and includes an ABS sensor. The 513188 fits certain models under the following makers: Chevrolet, GMC, ISUZU, BUIC, SAAB, Oldsmobile. Works with both V8 and L6 engines. Please check with your manufacturers manual, if you have any questions regarding your needs, make and fit.
Product Features
- ABS Sensors
- V8 and L6 Engines
- Provides a nice, snug fit
9. ACDelco FW435 GM Original Equipment Front Wheel Bearing and Hub Assembly
For overall quality and customer satisfaction, it’s ACDelco. The ACDelco FW435 GM Original Equipment (OEM) Front Wheel Bearing and Hub Assembly is designed to improve the quality of your ride. The FW435 has a wheel stud size of .55 inches, 33 splines, 3 flange bolt holes, a wheel pilot diameter of 2.81 inches, a brake pilot diameter of 3.00 inches and 6 wheel studs. The hub pilot diameter is 3.91 inches, stud length 2.56 inches. The FW435 is built for Anti-lock braking systems and comes with sensor. This assembly meets the Original Equipment Manufacture Specs, and is a replacement part recommended by GM for GM vehicles. Compatible vehicles include: Chevy Suburban, Chevy Tahoe, GMC Yukon and more.
Product Features
- ABS Sensors
- Meets or exceeds OEM standards
- Made from quality materials
8. Longgo HU513121 Set of 2 Wheel Bearing Hub Assembly
This is a set of 2 Wheel Bearing Hub Assemblies from Longgo, part number HU513121. This unit is easy to install, and is crafted with a cold-forged lip design, 5 hubs, sealed bearings. The Longgo is made to help lower the incidence of failure as a result of over-torqued bearings. the HU513121 guarantees you a smooth, vibration free ride due to their OEM design.
Product Features
- Cold forged lip design
- Sealed bearings
- Easy to install
7. MOOG 513188 Wheel Bearing and Hub Assembly
When you hear that rumble, or feel that vibration, it may be time to have those bearings checked. The MOOG 513188 have been tested both for performance and overall quality. MOOG uses “Application specific design enhancements” which ensure that your unit will have an extended lifespan, while continuing to provide you with a smooth, quiet ride. The 513188 is designed with a Quad lip seal, and precision matched components. Features include: Steel hub. 27 splines, and a 5 lug stud/bolt count.
Product Features
- Each unit is tested
- Application Specific Design Enhancements
- Quad lip seal
6. ECCPP Wheel Hub Bearing 513188
The ECCPP Wheel Hub Bearing, 513188 is made to fit both the driver and passenger side front, and includes an ABS sensor along with a harness. The ECCPP is designed for Chevy Buick models from 2003 to 2006 such as the Olds Bravada, GMC Envoy and Chevy Trailblazer, to name a few. This unit is made to be easy to install, has been crafted with great precision and comes to you coated with an anti-rust lubricant, has 6 lugs and ABS. ECCPP is determined to make your ride a good one, so each and every wheel bearing is thoroughly tested before it hits the shelves. This ensures that the fit will be tight, perfect and long lasting.
Product Features
- ABS sensor
- Harness
- Coated with an anti-rust lubricant
5. Detroit Axle Wheel Bearings 513188
This Front Wheel Bearing and Hub Assembly from Detroit Axle is crafted from high quality materials, and gives you a nice, snug fit. This model comes complete with ABS sensors and is designed for the Trailblazer, Rainier, Envoy and Ascender.
Product Features
- Made from high quality materials
- Nice snug fit
- ABS sensors
4. Detroit Axle Wheel Bearings, 513188
Those of you searching for replacement bearings for your Rainier, Envoy, or Trailblazer should take a look at the Front Wheel Hub and Bearing Assembly by Detroit Axle. This unit placement is right and left, front. Features include: 6 studs with ABS. This unit comes with an ABS sensor, and is made from high quality materials, just as you’d expect from Detroit Axle. Plus, all Detroit Axle Wheel Hubs and Bearing Assembly’s are made in a ISO9002 Certified facility
Product Features
- Left Right Front placement
- ABS sensors
- High quality materials
3. Detroit Axle Front Wheel Hub and Bearing Assembly
Detroit Axle has been in the business of producing fine auto parts for decades, and this is no exception. This 5 lug Front Wheel Hub and Bearing Assembly from Detroit Axle has been precision crafted to ensure you get the proper OEM fit for your Buick Century, Chevy Impala, Bonneville Allure, Aurora and more. The fit is excellent, and it comes complete with ABS sensors. Also, all Detroit Axle Wheel Hubs and Bearing Assembly’s are made in a ISO9002 Certified facility
Product Features
- Made in ISO9002 facility
- Proper OEM fit
- High quality Materials
2. Detroit Axle Wheel Hub and Bearing Assembly
After decades of creating high performance parts, you know you can trust this offering from Detroit Axle. This Wheel Hub and Bearing Assembly is for 2 wheel, rear wheel drive models, from 2000 to 2006, and include the Sierra 1500, Sierra 1500, and Yukon. This comes with ABS sensors, and customers have stated that it is an easy install. All Detroit Axle Wheel Hubs and Bearing Assembly’s are made in a ISO9002 Certified facility
Product Features
- Made in ISO9002 facility
- Proper OEM fit
- High quality Materials
Check Also: Top 7 Best Trailer Coupler Locks
1. Timken SP500300 Axle Bearing and Hub Assembly
Timken takes our spot in our review of the top ten best wheel bearing assemblies. This assembly is designed to cut down on friction, has maximum load handling ability, and made from high quality materials in order to extend it’s lifespan. Not only that, but this model has been pre-coated with anti-rust lubricants to eliminate corrosion. Timken also includes a specially made seal to extend bearing life. Don’t forget the Advanced Sensor Technology which monitors the wheel speed for your ABS.
Product Features
- Anti-rust lubricant applied
- Specially designed seals
- Advanced Sensor Technology
Conclusion
We hope you’ve enjoyed our review of the best wheel bearing assembly‘s. Please remember that each of these units are specific to certain vehicles. This is imperative, or you will not get the right fit, and you are at risk of poor vehicle performance or worse. If you are in doubt, simply check your cars manual, to find out more information about the wheel bearing assembly. Only purchase a unit that fits your make, model and year.